Akai CD3000XL Betreibershandbuch PDF herunterladen (Seite 17)

INTRODUCTION

S3000XL Operator’s Manual Page 11

SETTING UP THE S3000XL

This short section tells you how to get ‘up and running’ fast. For full details of operation,

please refer to the appropriate section in this manual.

CONNECTIONS

Don’t switch the S3000XL on for the moment.

mx1000

AKAI

MIDI IN

MIDI OUT

L/R OUTPUTS

SCSI

HARD DISK,

CD-ROM,

MO DRIVE, etc..

IND OUTS - to mixer

DIGI I/O

DAT

Connect the MIDI output of your MIDI controller (in this example, an Akai MX1000 master

keyboard) to the MIDI input of the S3000XL. Connect the L/R audio output to a stereo

amplifier (or use the L/MONO output of the sampler if you only have a mono amp) or to

two channels of a mixer (remembering to pan each channel hard left and right accordingly

to take full advantage of the S3000XL’s stereo outputs). The digital i/o can be connected

to a DAT machine (or any other digital recording device) or you could leave the digital

outputs of a CD player connected to the S3000XL’s digital input for sampling from the

many special sampling CDs that are currently available..

Before turning on the sampler, it’s a good idea to turn its volume down or to turn the

volume down on the amplifier or the mixer channels as the power up ‘thump’, although

very slight, could damage sensitive speakers, especially if the amp is turned up loud. Now

turn on the S3000XL. You will see a message in the LCD informing you of what is going

on.

After 15 seconds or so, your S3000XL is ready for use. Turn the volume up on the

sampler, amplifier and/or mixer.

Making sure that the MIDI controller is sending data on MIDI channel 1, play a few notes.

You will hear the oh so impressive test tone! Hardly inspiring is it? We want something a

bit more interesting than that.

NOTE: If no sound appears, check your MIDI connections and check that your MIDI

controller is sending MIDI channel 1. If, after this, you still hear no sound, try pressing the

ENT/PLAY key on the S3000XL’s front panel. If you hear a sound, then at least your

audio connections are o.k. and it’s the MIDI that needs attention. If you still don’t hear a

sound when you press the ENT/PLAY key, check your audio connections, volume

controls, etc..

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 312 313

Kommentare zu diesen Handbüchern

Keine Kommentare

Akai CD3000XL Betreibershandbuch Seite 17

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller Akai CD3000XL