Akai DR16 pro Betreibershandbuch Seite 35

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 167
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 34
2: Getting Around the DR16pro
Page 26
Entering Time Values
To locate to any point, set the “in” point, “out” point, direct locate point, stack locate point, etc., you
must display the desired time on the display. The desired time can be entered as follows:
1) Press the LOCATE key.
You will see a display similar to the following:
2) Use the numeric keypad to enter the desired time.
Time values should be entered from left to right. For example, to enter the time 15 minutes 32
seconds 20 frames, press these number keys in the following order:
1, 5, 3, 2, 2, 0.--:15:32:20” will appear on the display.
Note:
If you enter a time value that is greater than the possible range, the correct position
will be calculated. For example, if you enter 78 seconds, the DR16pro will locate to 1:18.
If you enter an incorrect time, press the RESET key, then re-enter the time.
Press the ESCAPE key to cancel the locate function.
3) Press the LOCATE key.
The DR16pro will display the specified time.
Note:
The DR16pro will actually locate to the specified time. If you want to return to the
previous point, press the LAST 0/– key.
Refer to the “Locate Functions” on page 77 for further details.
Of course, you can also use the Play , Stop , Fast Forward , and Rewind
keys, or the JOG/SHUTTLE control to enter a time on the display.
Specifying the “in” Point and “out” Point
The “in” point and “out” point values are used for auto punch-in/out recording and editing.
To set the “in” or “out” point:
1) Display the desired time on the display.
Select a location for the “in” or “out” point by using the Fast Forward or Rewind key
followed by the Stop key, or by rotating the JOG/SHUTTLE control.
Note:
In order to locate with the JOG/SHUTTLE control, the JOG ON key must be pressed
on. See “JOG ON key” on page 10.
2) Press the STORE/ENT key.
The message “MEMORY” will appear on the status line of the display and the time display
will flash.
ABS
Seitenansicht 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 166 167

Kommentare zu diesen Handbüchern

Keine Kommentare