
Other Features
Displaying TV Information: Program Number, Program Name,
Sound Indicator, time,. teletext, channel type and resolution
information is displayed on the screen when a new program is
entered or “INFO” button is pressed.
Mute function: Press button to display sound. Mute
indicator will be displayed in the upper side of the screen. To
cancel mute, there are two alternatives: the first one is pressing
the button and the second one is increasing the
volume level.
Picture Mode Selection: By pressing PRESETS button, you
can change Picture Mode settings in accordance with your
viewing requirements. Available options are Dynamic, Natural
and Cinema.
Displaying Subtitles: You can enable subtitles by pressing the
SUBTITLE button of the remote control. Press SUBTITLE
button again to disable subtitle function.
Teletext
Teletext system transmits information such as news, sports and
weather on your TV. Note that is the signal degrades, for
example in poor/adverse weather conditions, some text errors
may occur or the teletext mode may be aborted.
Teletext function buttons are listed below:
Teletext/ Mix: Activates teletext mode when pressed
once. Press again to place the teletext screen over the program
(mix). Pressing again will quit the teletext mode.
“RETURN” Index: Selects the teletext index page.
“INFO” Reveal: Shows hidden information (e.g. solutions of
games).
“OK” Hold: Holds a text page when convenient. Press again to
resume.
Subcode Pages: Selects subcode pages if
available when the teletext is activated.
P+/ P- and numbers (0-9): Press to select a page.
Note: Most TV stations use code 100 for their index pages.
Colord Buttens (RED/ GREEN/
YELLOW/ BLUE)
Your TV supports both FASTEXT and TOP text systems.
When these systems are available, the pages are divided into
groups or topics. When FASTEXT system is available, sections
in a teletext page will become color-coded and can be selected
by pressing the colored buttons. Press a colored button that
corresponds to with your needs. The colored writing will appear,
showing you which colored buttons to use when TOP text
transmission
is present. Pressing commands will
request the next or previous page respectively.
Tips
Screen Care: Clean the screen with a slightly damp, soft cloth.
Do not use abrasive solvents as they may damage the coating
layer of the TV screen. For your safety, unplug the mains plug
when cleaning the set. When moving the TV, hold it properly
from the bottom part.
Image Persistence: Please note that ghosting may occur while
displaying a persistent image. LCD TVs´image persistence may
disappear after a short time.
Try turning off the TV for a while.
To avoide this, do not leave the screen in still picture for
extended periods.
No Power: If your TV system has no power, please check the
main power cable and connection to the mains socket outlet.
Poor Picture: Have you selected the correct TV system? Is your
TV set or house aerial located too close to a non-earthed audio
equipment or neon lights, etc.? Mountains or high buildings can
cause double pictures or ghost images. Sometimes you can
improve the picture quality by changing the direction
of the
aerial. Is the picture or teletext unrecognisable? Check if you
have entered the correct frequency. Please retune the channels.
The picture quality may degrade when two peripherals are
connected to the TV at the same time. In such a case, disconnect
one of the peripherals.
No Picture: Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the aerial cable
damaged? Are suitable plugs used to connect the aerial? If you
are in doubt, consult your dealer. No
Picture means that your TV
is not receiving a transmission. Have you selected the correct
button on the remote control? Try once more. Also make sure
the correct input source has been
selected.
Sound: You can not heat any sound. Did you perhaps interrupt
the sound, pressing the button? Sound is coming from only
one of the speakers. Is the balance set to one extreme? See
Sound Menu.
Remote control: Your TV no longer responds to the remote
control. Perhaps the batteries are axhausted. If so you can still
use the local buttons on the TV.
Input Sources: If you cannot select an input source, it is
possible that no device is
connected. Check the AV cable and
connections if you have tried to connect a device.
Kommentare zu diesen Handbüchern