Akai DPS12 Betreibershandbuch PDF herunterladen (Seite 70)

Chapter 6: Mixer Function

Chapter 6: Mixer Function (Mixer Mode)

This chapter describes the functions and operations in Mixer mode, as well as the scene memories that store the

Mixer mode settings.

About Mixer mode

The DPS12 has an internal 20-channel (TRACK MIX channel x 12, THRU MIX channel x 8) digital mixer. Mixer

mode is used to control mix parameters, such as the channel level, pan, EQ, AUX send A/B, and channel on/off

settings. You can also store and recall a set of mix parameter settings as a scene memory in Mixer mode.

Pressing the [MIXER] key displays the following mixer screen. (You can also display this screen during recording

or playback.)

This screen contains the following information.

1 This value indicates the current position.

2 This field indicates the selection: TRACK MIX channel ( ) or THRU MIX channel ( ).

3 This bar graph indicates the output level or the input level of each track.

4 This field indicates the currently-selected mix parameter.

5 This field indicates the value of the mix parameter for the currently-selected channel.

6 This area shows a graphical field or a select field, depending on the currently-selected mix parameter.

7 The functions of the function keys are shown here. The function keys have the following functions.

• [F1] key/ [F2] key ..................... Used to switch between TRACK MIX channels and THRU MIX

channels. This function is global for all screens.

• † [F3] key/ π [F4] key ......Used to select a mix parameter. This function is global for all

screens.

• [F5] key/[F6] key .............................................. The function of these keys differs depending on the selected mix

parameter.

Basic operation in Mixer mode

You can use the faders and controls on the DPS12 to adjust the TRACK MIX channel’s level and pan settings. To

adjust other mix parameter settings, follow the steps below.

1. Press the [F1] key or the [F2] key to select TRACK MIX channel or THRU MIX channel

respectively.

✐

TIP :

To set a mix parameter in Mixer mode, first you need to specify whether you are making a setting

for TRACK MIX channels or THRU MIX channels. Refer to page 52 for more information on TRACK MIX

and THRU MIX.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 155 156

Keine Kommentare

Akai DPS12 Betreibershandbuch Seite 70