Akai MPK49 Spezifikationen PDF herunterladen (Seite 33)

MIDI PORT/CHANNEL FIELD

PLAY MODE FIELD

EDITING SUSTAIN PEDAL INPUT

The footswitch input on the rear of the MPK49 can be used in a variety of different ways. For example, a footswitch

can be used as a conventional MIDI CC switch. In addition, a footswitch may also be used to trigger specific pads on

the top panel (for example, to play out a kick drum sequence). Lastly, a footswitch may be used to remotely enable

and disable specific functions on the MPK49, such as Note Repeat, Time Division, Tap Tempo, Bank Change,

Play/Stop, Arp On/Off, Arp Latch, Play/Record or Sustain.

1. To edit footswitch input settings, press [EDIT] to enter Edit Mode.

2. Now press down on the footswitch to select it for editing.

3. You will see Page 1 displayed on the screen (shown on the left).

4. Select the event type for the footswitch by turning the [VALUE] dial.

5. Press [ENTER] to accept change and view page 2 parameters, if

available.

CONTROL CHANGE PARAMETERS

The following parameters can be accessed is you select “Control Change” as the footswitch event type.

MIDI CHANNEL FIELD

This field sets the MIDI Port and Channel which the footswitch will use to

transmit messages. You can assign the footswitch to one of two MIDI Ports, A

or B, and to one of 16 MIDI Channels on each port (i.e. A14). You can also

assign the footswitch to use the MIDI Common Channel.

1. Press [<] to select MIDI Port/Channel field.

2. While in MIDI Port/Channel field, use [VALUE] dial to select desired MIDI

Port and Channel.

3. Press [>] button to select the next field.

Note: When not used via USB, only footswitch messages assigned to port A

will be transmitted via the 5-pin MIDI port on the back of the MPK49.

CONTROL CHANGE FIELD

In this field you can set which Control Change Number the footswitch will

transmit when it is pressed.

1. Use [<] or [>] to select Control Change field.

2. While in Control Change field, use [VALUE] dial to select desired Control

Change Number.

3. Press [>] button to select the next field.

PLAY MODE

Here, you can select whether the footswitch transmits MIDI CC information in a

momentary (MOM) way, where pressing the footswitch outputs 127 and

releasing it transmits 0, or in a toggle (TGL) way where the first press outputs

127 and the second press transmits 0.

1. Press [>] to select Play Mode field.

2. While in Play Mode field, use [VALUE] dial to select desired Play Mode.

When finished editing, press [ENTER] to save or [<] to cancel the changes.

SELECT FOOTSWITCH EVENT TYPE

CONTROL CHANGE FIELD

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Akai MPK49 Spezifikationen Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für DJ-Controller Akai MPK49