Copyright 2011 MPCStorageSolution.com – All rights reserved. By MPCStorageSolution.com Procedure for installing Internal SCSI Compact Flash Reader
Copyright 2011 MPCStorageSolution.com – All rights reserved. the male molex connector to the main board power (female molex connector) as shown in t
Copyright 2011 MPCStorageSolution.com – All rights reserved. Next, locate the 2 metal tabs (see picture below) and using your thumb, push each tab
Copyright 2011 MPCStorageSolution.com – All rights reserved. After bending tabs, it should look like the following: Step 6
Copyright 2011 MPCStorageSolution.com – All rights reserved. Slide compact flash drive thru opening such that the bezel (front of drive) is flush wi
Copyright 2011 MPCStorageSolution.com – All rights reserved. recognition of the drive. The drive is preset to be recognized on scsi id 0. Or to the
Copyright 2011 MPCStorageSolution.com – All rights reserved. Non-hotswappable means you How To Use the Non-hotswappable SCSI Compact Flash Drive can
Copyright 2011 MPCStorageSolution.com – All rights reserved. drive is powered OFF. In other words, if the drive is powered ON, then the card cannot b
Copyright 2011 MPCStorageSolution.com – All rights reserved. We ship the compact flash drive kit preset to scsi id 0 (as shown in the first picture
Copyright 2011 MPCStorageSolution.com – All rights reserved. Tools required: Philips screwdriver Very important: Before starting, unplug power
Copyright 2011 MPCStorageSolution.com – All rights reserved. After removing bottom cover, you will see the floppy drive or zip drive which must be
Copyright 2011 MPCStorageSolution.com – All rights reserved. Looking at the next picture, you will see a set of wires circled in yellow that must b
Copyright 2011 MPCStorageSolution.com – All rights reserved. Gently push down each of the tabs on the scsi port to prepare for the scsi ribbon cable
Copyright 2011 MPCStorageSolution.com – All rights reserved. Below pictured is a 50 pin scsi ribbon cable that is included as part of the internal s
Copyright 2011 MPCStorageSolution.com – All rights reserved. Carefully slip the scsi cable between the white ribbon cable and the internal scsi p
Kommentare zu diesen Handbüchern